Catalogo de metadatos IGME-CSIC
Geological Map of Ibiza and Formentera at scale 1:100.000
Map showing the chronolithostratigraphic units of the area covered by the sheet separated by different types of contacts: normal or concordant, discordant and mechanical or intrusive. The tectonic structure is represented by the cartographic traces of the folds, the orientation and dip of the planar and linear elements contained in the rocks, as well as by the structural relationship -by means of faults and thrusts- between the rock assemblages differentiated cartographically. The map is accompanied by the lithostratigraphic legend and conventional signs.
Simple
- Alternate title
-
GeoIbizaFormentera 100
- Date (Creation)
- 1997-01-01
- Date (Publication)
- 2001-01-01
- Citation identifier
- 90106
- Presentation form
- Digital map
- Purpose
-
The objective is to make geological information available on a joint and continuous basis for regional planning in aspects related to geological resources, geological risks, environmental protection and communications networks.
To highlight geological knowledge from the synthesis of geological mapping at a larger scale.
- Credit
-
Authors:
Alberto Díaz de Neira
Alfredo García de Domingo
Inmaculada Gil Gil
Pilar Cabra Gil
Supervisor:
Pedro Ruiz Reig
- Status
- Completed
- Point of contact
-
Organisation name Individual name Electronic mail address Role Instituto Geológico y Minero de España (IGME-CSIC)
Alejandro Robador Moreno
Point of contact
- Maintenance and update frequency
- Not planned
-
IGME Thesaurus
-
-
Geología general
-
General geology.geology
-
General geology.lithology
-
Structural geology.fault
-
General geology.contact
-
General geology.rock
-
Stratigraphy
-
Chronostratigraphy
-
Lithostratigraphy
-
Roca Rock
-
Sedimentary rock
-
Crystalline rock
-
Igneous rock
-
Quaternary Geomorphology and Geology
-
Surface formation
-
Structural geology
-
Folding
-
Fold
-
Stratigraphy Systematics
-
Mesozoic
-
Triassic
-
Jurassic
-
Cretaceous
-
Neogene
-
Quaternary
-
-
GEMET
-
-
NATURAL ENVIRONMENT, ANTHROPIC ENVIRONMENT
-
LITHOSPHERE (soil, geological processes)
-
lithosphere
-
rocks
-
-
CEOLocation
-
-
COUNTRIES
-
SPAIN
-
- Keywords
-
-
Spain
-
Formentera
-
Ibiza
-
- Specific usage
-
The Geological Map of Menorca and Ibiza at a scale of 1:100,000 can be used for all activities related to hydrogeological and mineral resources, public works, agriculture, land use, territorial planning, the environment, forecasting, prevention and mitigation of geological risks and in general with any action on the physical environment that supports decision-making in actions on the territory is a user of this cartography.
- User contact info
-
Organisation name Individual name Electronic mail address Role Instituto Geológico y Minero de España (IGME-CSIC)
Punto de contacto
- Access constraints
- Other restrictions
- Other constraints
- No limitations on public access.
- Use constraints
- Other restrictions
- Other constraints
-
LICENCE OF USE: Conditions of public use and dissemination of information for the re-use of IGME data. http://www.igme.es/Ayuda/CondiUso.htm
- Title
-
Geological Map of Spain at a scale of 1:50.000, MAGNA.
- Date (Revision)
- 1991-01-01
- Cited responsible party
-
Organisation name Individual name Electronic mail address Role Instituto Geológico y Minero de España (IGME-CSIC)
Point of contact
- Aggregate Datasetindentifier
- 20000
- Association Type
- Larger work citation
- Spatial representation type
- Vector
- Denominator
- 100000
- Language
- Spanish; Castilian
- Character set
- 8859 Part 1
- Topic category
-
- Geoscientific information
))
- Unique resource identifier
- EPSG:6230
- Unique resource identifier
- EPSG:23031
- Unique resource identifier
- EPSG:4258
- Distribution format
-
Name Version Mapa digital: SHP - ArcView ShapeFile
8.2
Mapa digital: ARCC - Coverage of Arc-Info
Unknown
Mapa digital: ARCE - ARC/INFO Export format
Unknown
Mapa digital: PDF - Portable Document Format
Unknown
Mapa en papel
Unknown
Servicio web: WMS - Web Map Service
1.3.0
Distributor
- Distributor contact
-
Organisation name Individual name Electronic mail address Role Instituto Geológico y Minero de España (IGME-CSIC)
Distributor
- Distributor format
-
Name Version Mapa digital: SHP - ArcView ShapeFile
8.2
Mapa digital: ARCC - Coverage of Arc-Info
-
Mapa digital: ARCE - ARC/INFO Export format
-
Mapa digital: PDF - Portable Document Format
-
Distributor
- Distributor contact
-
Organisation name Individual name Electronic mail address Role Centro de Documentación del Instituto Geológico y Minero de España (IGME-CSIC)
Distributor
- Distributor format
-
Name Version Mapa en papel
-
Distributor
- Distributor contact
-
Organisation name Individual name Electronic mail address Role Vicedirección Técnica de Sistemas de Información Geológica del Instituto Geológico y Minero del España (IGME-CSIC)
Distributor
- Distributor format
-
Name Version Servicio web: WMS - Web Map Service
1.3.0
- OnLine resource
-
Protocol Linkage Name OGC:WMS-1.1.1-http-get-capabilities
http://mapas.igme.es/gis/services/Cartografia_Geologica/IGME_GeologicoIbiza_100/MapServer/WMSServer?Request=GetCapabilities&Service=WMS Link to the GetCapabilities of the web service hosting the product
WWW:LINK-1.0-http--related
http://mapas.igme.es/Servicios/default.aspx#IGME_GeologicoIbiza_100 Link to the product page on the IGME web site
- Hierarchy level
- Dataset
Completeness commission
- Name of measure
-
Duplicate phenomena.
- Measure description
-
Geometric and topological control using GIS application tools.
Conformance result
- Title
-
Geometric and topological control using the tools of the GIS application.
- Date (Revision)
- 2001-01-01
- Explanation
-
Error rate 0 %
- Pass
- Yes
Completeness omission
- Name of measure
-
Lack of phenomena
- Measure description
-
Visual spot check and cross-checking of spatial information with attribute tables.
Conformance result
- Title
-
Visual spot check and cross-checking of spatial information with attribute tables
- Date (Revision)
- 2001-01-01
- Explanation
-
Digital comparative validation and visual comparative check of the original map and the digitised map. Validation with error rate < 1%.
- Pass
- Yes
Conceptual consistency
- Name of measure
-
Degree of approximation of the digital data with the conceptual model. Distribution of phenomena in classes.
- Measure description
-
Manual verification.
Conformance result
- Title
-
MAGNA geological mapping data model in digital format.
- Date (Revision)
- 2012-02-01
- Explanation
-
Check that the digital information is consistent with the standards that conceptually define it. Consult the standard
- Pass
- Yes
Conceptual consistency
- Name of measure
-
Degree of approximation of the digital data with the conceptual model. Properties of the phenomena
- Measure description
-
Automatic verification.
Conformance result
- Title
-
Modelo de datos de la cartografía geológica MAGNA en formato digital
- Date (Revision)
- 2012-02-01
- Explanation
-
Check that the digital information is consistent with the standards that conceptually define it. Consult the standard
- Pass
- Yes
Conceptual consistency
- Name of measure
-
Existence of codes outside the established range for each attribute.
- Measure description
-
Automatic verification
Conformance result
- Title
-
Specifications for the digitisation of MAGNA geological mapping.
- Date (Revision)
- 2012-02-01
- Explanation
-
Check that the digital information is consistent with the standards that conceptually define it. Consult the standard
- Pass
- Yes
Format consistency
- Name of measure
-
Degree of approximation of the data to the established physical structure.
- Measure description
-
Automatic verification
Conformance result
- Title
-
Specifications for the digitisation of MAGNA geological mapping
- Date (Revision)
- 2012-02-01
- Explanation
-
Check that the digital information is in accordance with the standards. Consult the standard
- Pass
- Yes
Format consistency
- Name of measure
-
Degree of conformity of the data to the defined topological rules. Absence of geological contacts with any of their ends (nodes) not connected to another node of other contacts, a fault or a conventional boundary.
- Measure description
-
Automatic verification
Conformance result
- Title
-
MAGNA geological mapping data model in digital format.
- Date (Revision)
- 2012-02-01
- Explanation
-
Check that the digital information is in accordance with the standards. Consult the standard
- Pass
- Yes
Format consistency
- Name of measure
-
Degree of conformity of the data to the defined topological rules. Absence of geological contacts separating enclosures belonging to the same cartographic unit.
- Measure description
-
Automatic verification
Conformance result
- Title
-
MAGNA geological mapping data model in digital format.
- Date (Revision)
- 2012-02-01
- Explanation
-
Check that the digital information is in accordance with the standards. Consult the standard
- Pass
- Yes
Absolute external positional accuracy
- Name of measure
-
External absolute accuracy
- Measure description
-
Mean square error in the map registration to digitise
Conformance result
- Title
-
Mean square error in the map registration to digitise
- Date (Revision)
- 2001-01-01
- Explanation
-
Verification that the positional error is less than that required by the scale of the map > 20
- Pass
- Yes
Thematic classification correctness
- Name of measure
-
Absence of errors in the assignment of classes to phenomena.
- Measure description
-
Comparative study with the original cartography. Random sampling
Conformance result
- Title
-
Comparative study with the original cartography. Random sampling
- Date (Revision)
- 2001-01-01
- Explanation
-
Digital comparative validation and visual comparative check of the original map and the digitised map. Validation with error rate < 1%.
- Pass
- Yes
Thematic classification correctness
- Name of measure
-
Absence of errors in the assignment of identifiers to cartographic units.
- Measure description
-
Comparative study with original map
Conformance result
- Title
-
Comparative study with original map
- Date (Revision)
- 2001-01-01
- Explanation
-
Digital comparative validation and comparative visual check of the original map and the digitised map. Error rate 1%. Error area < 0.1% in cartographic units.
- Pass
- Yes
Non quantitative attribute accuracy
- Name of measure
-
Absence of errors in the assignment of values.
- Measure description
-
Comparative study with original map
Conformance result
- Title
-
Comparative study with original map
- Date (Revision)
- 2001-01-01
- Explanation
-
Digital comparative validation and comparative visual check of the original map and the digitised map. Error rate 1%. Error area < 0.1% in cartographic units.
- Pass
- Yes
Conformance result
- Date (Publication)
- 2010-12-08
Citation identifier
- Explanation
-
Consult the regulations
- Pass
- No
- Statement
-
Map made mainly on the information reflected in the National Geological Map at a scale of 1:50.000 (second series), MAGNA with the incorporation of data from doctoral theses and unpublished works. Digitisation carried out in 2002. Normalisation and generation of symbolised files (.lyr) and cartography, in version 8.2 of ArcGIS, in 2003.
- Description
-
Collection and analysis of previous information:
Compilation of MAGNA geological information and of work carried out in the area covered by the sheet carried out subsequent to the MAGNA sheets.
- Description
-
Production of the map:
Study of the cartographic units and revision of the samples.
Preparation of the legend Correlation between the cartographic units of the MAGNA sheets and the chronolithostratigraphic legend of the 1:100,000 scale map.
Spatial adjustment between sheet boundaries.
Adjustment to the selected topographic base.
Drawing of the geological map at 1:100.000 scale.
- Description
-
Process of digitalisation of the information:
Analysis of the entities present in the cartography. Assignment of codes.
Digitisation of geological contacts and faults. Generation of the enclosures that constitute the cartographic units. Digitisation of the rest of the geological entities. Digitisation of the chronolithostratigraphic legend.
Error control and correction.
- Description
-
The rock units of the sheet separated by different types of contacts are represented, together with the tectonic structure, faults and map traces of folds, the orientation and dip of planar and linear elements contained in the rocks, structural and textural singularities of igneous and metamorphic rocks, water points, mineral deposits and indications, presence of fossils and other elements of punctual representation.
- Denominator
- 50000
- Title
-
Geological Map of Spain scale 1:50.000 MAGNA (Second series 1st edition)
- Date (Revision)
- 1991-01-01
- Cited responsible party
-
Organisation name Individual name Electronic mail address Role Instituto Geológico y Minero de España (IGME-CSIC)
Originator Instituto Geológico y Minero de España (IGME-CSIC)
Distributor
- Presentation form
- Hardcopy map
- Presentation form
- Hardcopy document
- Presentation form
- Digital map
- Presentation form
- Digital document
Metadata
- File identifier
- ESPIGMEGEOIBIZAFORMENTERA1002010112590106 XML
- Metadata language
- Spanish; Castilian
- Character set
- UTF8
- Hierarchy level
- Dataset
- Date stamp
- 2025-05-12T10:36:13.708171Z
- Metadata standard name
-
Reglamento (CE) Nº 1205/2008 de Inspire, "Perfil IGME"
- Metadata standard version
-
TG 2.0
- Metadata author
-
Organisation name Individual name Electronic mail address Role Instituto Geológico y Minero de España (IGME-CSIC)
Leticia Vega Martín
Point of contact
- Other language
-
Language Character encoding English UTF8 Spanish; Castilian UTF8
)))